Deleting A Cue Point; Adding A New Cue Point To The Cue Point List - Fostex PD606 Owner's Manual

Chapter 5: Recording/Playback

• Deleting a cue point

To delete an unnecessary cue point, select "<Delete>" using the [MENU] dial and
press the [ENTER/YES] key ("Sure?" flashes).
Press the [ENTER/YES] key again to delete the cue point from the list.
The display returns to the home screen
<Note>:
empty while the time value column shows "--h --m --s --f --sf".
To exit the CUE LIST screen, press the [EXIT] key.

Adding a new cue point to the cue point list

While the CUE LIST screen is shown, you can add a new cue point to the list.
Select a desired cue number which does not hold data.
By pressing the [ENTER/YES] key, time data of the current recorder position is set as
the cue point.
In the example below, Cue 05 is set when the current recorder position is "01h 58m
20s **f **sf" (LTC time).
To exit the CUE LIST screen, press the [EXIT] key.
98
Location Recorder Model PD606
flashing
After deleting a cue point, the label column of the cue point becomes
flashing