Mixer Settings; Input Signal Selection - Fostex PD606 Owner's Manual

The mixer section provides the function for mixing and sending six input sources (analog or
digital) to the stereo bus. You can record the stereo bus signals to stereo L/R tracks.
The six input channels of the mixer section provide controls for the analog input signal, includ-
ing the gain, limiter, HPF, phase, etc. The mixer section also features track arming function
(ready/safe selection) for tracks 1 through 6 and the stereo L/R tracks.
The following diagram shows the signal flow of the mixer section of the PD606.
ANALOG IN 1-6
DIGITAL IN
P48V LINE/MIC
T12V
LIMITER
ST BUS

Input signal selection

According to the analog audio signal fed to the [ANALOG IN] connector, set the LINE-MIC
switch to "LINE" or "MIC". When you select "MIC", set the phantom power switch to "48V",
"DM" or "T12" appropriately according to the microphone connected.

Mixer settings

AMP
GAIN
HPF
AD
PHASE
SEND
PAN
ST BUS
MASTER
LINE MIC LINE
48V DM T12 48V
130 200 130
50 300 50
-12 -6 OFF -12
FROM RECORDER
(REPRO DATA 1-8)
DA
REPRO/
MONITOR
INPUT
SEL/PFL
SEL
SAFE/
READY
LIMITER
MIC LINE MIC LINE MIC LINE MIC LINE MIC
DM T12 48V DM T12 48V DM T12 48V DM T12 48V DM T12
200 130 200 130 200 130 200 130 200
300 50 300 50 300 50 300 50 300
-6 OFF -12 -6 OFF -12 -6 OFF -12 -6 OFF -12 -6 OFF
Location Recorder Model PD606
Chapter 5: Recording/Playback
TO ANALOG OUT 1-6
TO HP/MON SP
DA
TO STEREO BUS OUT
DA
TO RECORDER
(1 - 8TRK FILE)
LINE-MIC switches and
INPUT
SEL
phantom power switches
(Hz)
HPF
(dB/oct)
79