Restore Factory Defaults - Edimax user guide Router User Manual

•
Buttons
•
•

Restore Factory Defaults

When the "Restore Factory Defaults" button on the Status screen above is clicked, the following
screen is displayed.
If the "Restore Default Value" button on this screen is clicked:
•
ALL of your settings will be erased.
•
The default IP address, password and ALL other settings will be restored to the factory default
values.
•
The DCHP server function will be enabled.
These changes may mean that the current connection is invalid, and you will have to re-connect to
The Load Balancer using its default IP address (192.168.1.1).
Refresh – Update the data on screen.
Restart – Restart (reboot) The Load Balancer.
Restore Factory Defaults – This will delete all existing settings, and restore
the factory default settings. See below for details.
Figure 9-2: Restore Factory Defaults
Page 65