Table of Contents
Advertisement
•
Enter the name of the firmware upgrade file on your PC, or click the "Browse" button to locate
the file.
•
Enter the LAN IP address of The Load Balancer in the "Server IP" field.
•
Click "Download" to send the file to The Load Balancer.
3. When downloading is finished. It should then work normally, using the default settings.
Note:
The supplied Windows TFTP utility also allows you to perform three (3) other operations:
•
Save the current configuration settings to your PC (use the "Upload" button).
•
Restore a previously-saved configuration file to The Load Balancer (use the "Download" button).
•
Set The Load Balancer to its default values (use the "Set to Default" button).
Figure 1-3: Windows TFTP utility
Page 7
Advertisement
Table of Contents
