Edimax user guide Router User Manual page 39

Settings – Dynamic DNS
Dynamic DNS Use this to Enable/Disable the Dynamic DNS feature, and select the required
Service service provider.
•
•
•
•
•
•
WAN Port
Binding
•
Additional These options are available if using the standard client.
Standard
•
Client or 3322
Settings
•
•
Disable – Dynamic DNS is not used.
TZO – Select this to use the TZO service (www.tzo.com). You must configure
the TZO section of this screen.
Standard Client – Select this to use the standard service (from
www.dyndns.org or other provider). You must configure the Standard Client
section of this screen.
3322(in China) – This is available in China. It is similar to "Standard client"
User Defined DDNS Server – This is the user define DDNS server. If the
DDNS other than TZO, dyndns.org and 3322.
Select the WAN port on which the Dynamic DNS is used.
The "Force Update" button will update your record on the Dynamic DNS
Server immediately.
Enable Wildcard – If selected, traffic sent to sub-domains (of your Domain
name) will also be forwarded to you.
Enable backup MX – If enabled, you must enter the Mail Exchanger address
below.
Mail Exchanger – If the setting above is enabled, enter the address of the
backup Mail Exchanger.
Page 35