Special Application - Edimax user guide Router User Manual

Special Applications
If you use Internet applications which have non-standard connections or port numbers, you may find
that they do not function correctly because they are blocked by the firewall in The Load Balancer. In
this case, you can define the application as a "Special Application" in order to make it work.
Note that the terms "Incoming" and "Outgoing" on this screen refer to traffic from the client (PC)
viewpoint
Settings – Special Applications
Select Special Application Name
Select Name Item
Special Application Configuration
Enable
Name
Outgoing Protocol
Figure 4-5: Special Applications
This lists any special applications, which are currently defined.
•
If adding a new Special Application, ignore this list.
Just enter your data in the Special Application Configuration
section, and click the "Add" button.
•
To edit an existing entry, select it from this list, and click the "Select"
button. The data for the selected application will then be displayed
in the Special Application Configuration section.
Make any required changes, and then click the "Update" button.
Use this to Enable or Disable this Special Application as required.
Enter a descriptive name to identify this Special Application.
Select the protocol used by this application, when sending data to the
remote server or PC.
Page 32