Buttons
Custom Virtual Server
List
•
Protocol Type – Select the network protocol used by this sever
type.
•
LAN Port Range – Enter the range of port number used for
outgoing traffic from this Server. If only a single port is required,
enter it in both fields.
•
WAN Port Range - – Enter the range of port number used for
incoming traffic to this Server. If only a single port is required, enter
it in both fields
•
Interface Binding – This selection allows the severs binding WAN1
port or WAN2 port, or even both WAN1 and WAN2 ports together.
•
Add – Create a new Special Application entry.
•
Delete – Delete the selected entry.
•
Update – Save any changes you have made to the current entry.
•
Cancel – Cancel any changes you have made since the last save
operation.
This table shows details of all Custom Virtual Servers which have been
defined.
Page 31