III‐3‐9‐4. Backup/Restore
Backup Settings
Restore Settings
Restore to
Factory Default
III‐3‐9‐5. Upgrade
The upgrade page allows you to upgrade the system firmware to a more
recent version. You can download the latest firmware from the Edimax
website. After the upgrade, the system will restart.
Do not switch off or disconnect the device during a firmware
upgrade, as this could damage the device. It is recommended that
you use a wired Ethernet connection for a firmware upgrade.
Click "Save" to save the current settings on your
computer as config.bin file.
Click "Browse" to find a previously saved
config.bin file and then click "Upload" to replace
your current settings.
Click "Reset" to restore settings to the factory
default. A pop‐up window will appear and ask
you to confirm and enter your log in details.
Enter your username and password and click
"Ok". See below for more information.
80