Table of Contents
Advertisement
Package Contents
The following items should be included:
•
The Load Balancer Unit
•
Power Adapter
•
Quick Installation Guide
•
CD-ROM containing the on-line manual.
If any of the above items are damaged or missing, please contact your dealer immediately.
Physical Details
Front Panel
Operation of the Front Panel LEDs is as follows:
LAN
LINK/ACT
ON – Physical connection or data in/out.
OFF – No physical connection.
10M/100M
ON – The corresponding LAN port is using 100BaseT.
OFF – 10BaseT connection on the corresponding LAN port or no connection.
WAN
LINK/ACT
ON – Physical connection to the Broadband modem on WAN port 1/2 established.
OFF – No physical connection on WAN port 1/2.
10M/100M
ON – Physical connection using 100BaseT on WAN port 1/2 established.
OFF – 10BaseT connection or no connection on WAN port 1/2.
System
Power
OFF – No power.
ON – Normal Operation
Status
OFF – Normal operation.
ON – Firmware not loaded or Hardware error.
Blinking – Data in/out
Page 4
Advertisement
Table of Contents
