Also, some Status and Error conditions are indicated by combinations
of LEDs, as shown below
LED Action
WAN1 LINK/ACT & 10M/100M LEDs flash alternatively.
WAN1 LINK/ACT & 10M/100M LEDs flash concurrently.
WAN1 LINK/ACT & 10M/100M LEDs solid On
WAN2 LINK/ACT & 10M/100M LEDs solid On
LAN1 LINK/ACT & 10M/100M LEDs solid On
Condition
Firmware Download in progress.
MAC address not assigned.
SDRAM error
Timer/Interrupt error
LAN/WAN error
Page 5