Table of Contents
Advertisement
Primary DNS Server
Secondary DNS Server
MAC Address Clone
After finishing all the settings here, please click OK to activate them.
D
H
C
P
D
H
C
P
DHCP allows a user to obtain an IP address automatically from a DHCP server on the Internet.
If you choose DHCP mode, the DHCP server of your ISP will assign a dynamic IP address for
your router automatically. It is not necessary for you to assign any setting,
Router Name
MAC Address Clone
After finishing all the settings here, please click OK to activate them.
You must specify a DNS server IP address here because your
ISP should provide you with usually more than one DNS
Server. If your ISP does not provide it, the router will
automatically apply default DNS Server IP address:
198.95.1.1 to this field.
You can specify secondary DNS server IP address here
because your ISP often provides you more than one DNS
Server. If your ISP does not provide it, the router will
automatically apply default secondary DNS Server IP
address.
MAC Address Clone is available when the box of Enable is
checked. The router will detect the MAC address
automatically. The result will be displayed in the field of
MAC Address.
Type in a name for the router. It must be the same as the
name used in Syslog.
MAC Address Clone is available when the box of Enable is
checked. The router will detect the MAC address
automatically. The result will be displayed in the field of
MAC Address.
70
VigorFly 200 Series User's Guide
Hide quick links:
Advertisement
Table of Contents
