Table of Contents
Advertisement
P
P
T
P
/
L
P
P
T
P
/
If you click PPTP/L2TP as the connection type, please manually enter the Username/Password
provided by your ISP and all the required information.
L2TP/PPTP Server IP
Address
User Name
Password
WAN IP Network Settings You can choose Static IP or DHCP as address mode setting.
IP Address
Subnet Mask
Redial Policy
MAC Address Clone
VigorFly 200 Series User's Guide
2
T
P
L
2
T
P
Specify the IP address of the PPTP/L2TP server.
Assign a specific valid user name provided by the ISP.
Assign a valid password provided by the ISP.
Type the IP address if you choose Static IP as the WAN IP
network setting.
Type the subnet mask if you chose Static IP as the WAN IP.
If you want to connect to Internet all the time, you can choose
Always On.
Always On – Choose it to enable router always keep
connection.
Connect On Demand - If the connection has been idled over
the value, the router will drop the connection.
Idle Time - Set the timeout for breaking down the Internet
after passing through the time without any action. The unit is
seconds. The range is XX ~ XX.
It is available when the box of Enabled is checked. Click
Clone MAC Address. The router will detect the MAC
17
Hide quick links:
Advertisement
Table of Contents
