Table of Contents
Advertisement
W
E
P
/
8
0
2
.
1
x
W
E
P
/
8
0
2
.
1
x
Remote Authentication Dial-In User Service (RADIUS) is a security authentication
client/server protocol that supports authentication, authorization and accounting, which is
widely used by Internet service providers. It is the most common method of authenticating and
authorizing dial-up and tunneled network users.
The built-in RADIUS client feature enables the router to assist the remote dial-in user or a
wireless station and the RADIUS server in performing mutual authentication. It enables
centralized remote access authentication for network management.
If you choose WPA-Radius as the security configuration, you have to specify WPA mode,
algorithm, Radius server, Radius server port and Radius server secret respectively.
WEP
IP Address
Port
Shared Secret
Session Timeout
Idle Timeout
Disable - Disable the WEP Encryption. Data sent to the AP
will not be encrypted.
Enable - Enable the WEP Encryption.
Enter the IP address of RADIUS server.
The UDP port number that the RADIUS server is using. The
default value is 1812, based on RFC 2138.
The RADIUS server and client share a secret that is used to
authenticate the messages sent between them. Both sides
must be configured to use the same shared secret.
Set the maximum time of service provided before
re-authentication. Set to zero to perform another
authentication immediately after the first authentication has
successfully completed. (The unit is second.)
Set the maximum time that a wireless device may remain
idle. (The unit is second.)
22
VigorFly 200 Series User's Guide
Hide quick links:
Advertisement
Table of Contents
