Draytek Vigor 2200VG Quick Start Manual

Draytek Vigor 2200VG Quick Start Manual

Draytek vigor 2200vg: quick start
Hide thumbs Also See for Vigor 2200VG:

Advertisement

Quick Links

Vigor2200V/VG Quick Start Guide
Copyright Information
Copyright
Copyright 2004 All rights reserved. This publication contains
Declarations
information that is protected by copyright. No part may be
reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language without written
permission from the copyright holders.
Trademarks
The following trademarks are used in this document:
Windows, Windows 95, 98, Me, NT, 2000, XP and Explorer
are trademarks of Microsoft Corp.
Computer Inc.
Other products may be trademarks or registered trademarks
of their respective manufacturers.
Safety Instructions and Approval
Safety
Instructions
the router.
repaired only be authorized and qualified personnel. Do not
try to open or repair the router yourself.
bathroom.
temperature range of +5 to +40 Celsius.
sources. The housing and electronic components may be
damaged by direct sunlight or heat sources.
Keep the package out of reach of children.
When you want to dispose of the router, please follow local
regulations on conservation of the environment.
Warranty
We warrant to the original end user (purchaser) that the
router will be free from any defects in workmanship or
materials for a period of three (3) years from the date of
purchase from the dealer. Please keep your purchase
receipt in a safe place as it serves as proof of date of
purchase. During the warranty period, and upon proof of
purchase, should the product have indications of failure due
to faulty workmanship and/or materials, we will, at our
discretion, repair or replace the defective products or
components, without charge for either parts or labor, to
whatever extent we deem necessary tore-store the product
to proper operating condition. Any replacement will consist
Microsoft is a registered trademark of Microsoft Corp.
Apple and Mac OS are registered trademarks of Apple
Read the installation guide thoroughly before you set up
The router is a complicated electronic unit that may be
Do not place the router in a damp or humid place, e.g. a
The router should be used in a sheltered area, within a
Do not expose the router to direct sunlight or other heat

Advertisement

Table of Contents
loading

Summary of Contents for Draytek Vigor 2200VG

  • Page 1 Vigor2200V/VG Quick Start Guide Copyright Information Copyright Copyright 2004 All rights reserved. This publication contains Declarations information that is protected by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders.
  • Page 2 Firmware & Due to the continuous evolution of DrayTek ADSL & Router Tools Updates technology, all routers will be regularly upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and documents.
  • Page 3 Vigor2200VG Series Residential Broadband VoIP Routers DrayTek Corp. declares that Vigor2200V series of routers are in compliance with the following essential requirements and other relevant provisions of R&TTE Directive 1999/5/EEC. The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive 89/336/EEC by complying with the requirements set forth in EN55022/Class B and EN55024/Class B.
  • Page 4 Co mmi s s ion ( FC C) I n te rferen ce Statement The Vigor2200V and Vigor2200VG have been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including...
  • Page 5: Table Of Contents

    Table of Contents 1. Introduction…………………………………………………... 1.1 Brief Overview…………………………………………………… 2 1.2 Highlights…………………………………………………………. 3 1.3 Front Panel LEDs and Rear Panel Interfaces…………….… 4 1.4 Package Contains……………………………………………….. 6 2. Quick Install Your Vigor2200V/VG Router………………. 2.1 Hardware Installation……………………………….………….. 8 2.2 Configure Your Router via Quick Start Wizard…………….. 9 PPPoE-type…………………………………………………………….
  • Page 6 Peer to Peer…………………………………………………………… 24 Calling via SIP Server………………………………………………… 25 5. Trouble Shooting……………………………………………. Is the Hardware Status OK?…………………………………………. 26 Are the Network Connection Settings on Your PC OK?………….. 26 Can You Ping the Router from PC?………………………………… 27 Are the ISP Settings OK?……………………………………………. 28 Back to Factory Default Setting………………………………………...
  • Page 7: Introduction

    1. Introduction of Benefits Easy Internet-Sharing of your broadband* connection Robust Firewall to help protect your network from external attacks Comprehensive VPN facilities to provide cost-effective and secure methods for deployment of linked branch offices and teleworkers. Making regular phone calls over your broadband connection by simply plugging in your phone.
  • Page 8: Brief Overview

    1.1 Brief Overview The Vigor2200V series broadband router/Firewall with VoIP phone ports, an Internet access solution for your LAN, which provides you with the shared web surfing and countless value-added features, such as full VPN facility, Firewall / Security, VoIP, and 802.11g Wireless LAN (up to 54Mbps for Vigor2200VG only).
  • Page 9: Highlights

    1.2 Highlights VoIP (Voice over IP) Connect a regular telephone to make and receive voice calls using your existing broadband connection, leaving your regular line free Make and receive calls using your regular phone line (POTS) or via VoIP using the same telephone handset Auto-Fallback - Phone switches to PSTN during power cut SIP, RTP/RTCP protocols...
  • Page 10: Front Panel Leds And Rear Panel Interfaces

    1.3 Front Panel LEDs and Rear Panel Interfaces 1.3.1 Vigor2200V Status Explanation Firewall The firewall function is active. blinking When encountering DoS attacks. The VPN function is active. orange A normal 10Mbps connection is through its corresponding port. green A normal 100Mbps connection is through its corresponding port.
  • Page 11 1.3.2 Vigor2200VG Status Explanation WLAN The Wireless LAN function is active. blinking Data packets are transmitted over Wireless LAN. The VPN function is active. orange A normal 10Mbps connection is through its corresponding port. green A normal 100Mbps connection is through its corresponding port.
  • Page 12: Package Contains

    1.4 Package Contains Quick Start Guide UK-type power adapter EU-type power adapter USA/Taiwan-type power AU/NZ-type power adapter adapter...
  • Page 13 RJ-45 (Ethernet) RJ-11 to RJ-11 Antenna for V2200VG...
  • Page 14: Quick Install Your Vigor2200V/Vg Router

    2. Quick Install Your Vigor2200V/VG Router 2.1 Hardware Installation Before starting to configure the router, you have to connect your devices correctly. 1. Connect the WAN interface to the external Cable/ADSL modem with a RJ-45 cable. 2. Connect one port of 4-port switch to your computer with a RJ-45 cable. 3.
  • Page 15: Configure Your Router Via Quick Start Wizard

    2.2 Configure Your Router via Quick Start Wizard Introduction The Quick Start Wizard is designed for you to easily set up your broadband Internet access. We already integrated Quick Start Wizard into the Web Configurator of Vigor2200V/VG series. You can directly access the Quick Start Wizard via Web Configurator.
  • Page 16 Step 2. The Main Menu will pop out after completing previous step. Step 3. Now Quick Start Wizard is switched on. Enter login click Next to continue. Step 4. Select the appropriate TIME ZONE for your location. password. Then...
  • Page 17: Pppoe-Type

    Step 5 Select the appropriate Internet connection type to your ISP. In terms of several Internet connection type, please follow procedures as below: PPPoE users Enter your user name and password provided by your ISP. Dial on Demand : The router will ONLY connect to your ISP on demand. By “on demand”, it means when any LAN user attempt to send data onto the Internet.
  • Page 18: Pptp & Obtain Ip Automatically

    PPTP users Enter your user name and password provided by your ISP. Obtain an IP address automatically: Set the WAN interface as a DHCP client that will ask for the IP network settings from the DHCP server or PPTP-enabled DSL modem. Specify an IP address: If you are not sure whether there are any DHCP services on the WAN interface, you can manually assign an IP address to the...
  • Page 19 WAN IP address: this is the IP address assigned by your ISP for your router. You shall specify the IP address of the router here. e.g. 172.16.2.84 Subnet Mask: an address code that determines the size of the network; this is the subnet mask of the router, when seen by external users on the Internet (including your ISP).
  • Page 20: Automatic Qos For Voip

    We also have the Ez Configurator in the product CD. Once if you already followed the previous section 2.2 Configure your Router via Quick Start Wizard and were able access the Internet successfully, you will NOT need to use Ez Configurator from the CD configure your Vigor Router again.
  • Page 21: Wireless Lan Settings

    3. Wireless LAN Settings This section will guide you to operate the capabilities of Wireless LAN instantly on the router. Please follow the menu tree of the Wireless LAN configuration below to set up wireless function. Wireless LAN >> General Settings The Frequency Domain is set as Europe and the MAC address is shown as above.
  • Page 22: General Settings

    3.1 General Settings Click General Settings to configure the Service Set Identifier (SSID) and wireless channel. 1. Enable Wireless LAN: Check the box to enable wireless function. 2. Mode: Select an appropriate wireless mode. Mixed (11b+11g): The radio can support both IEEE802.11b and IEEE802.11g protocols simultaneously.
  • Page 23: Security Settings

    The default SSID is "default". We suggest you change it to a particular name. In this case, SSID was changed to “DrayTek”. SSID (Service Set Identifier): It is used to name the wireless LAN, and must have the same content in client PC/notebook wireless card(s). SSID can be any text numbers or various special characters.
  • Page 24 1. Mode: Select an appropriate encryption to improve the security and privacy of your wireless data packets. Disable: Turn off the encryption mechanism. WEP Only: Accepts only WEP clients and the encryption key should be entered in WEP Key. WEP or WPA/PSK: Accepts WEP and WPA clients simultaneously and the encryption key should be entered in WEP Key and PSK respectively.
  • Page 25: Voip Settings

    4. VoIP Settings The FXS port can be connected to an analog phone only. Do not Caution connect the FXS port to the telephone wall jack. This connection might damage your router. The following is the menu tree of the VoIP configuration. VoIP >>...
  • Page 26: Dialplan Setup

    4.1 DialPlan Setup The Vigor2100V/VG series have one FXS port (the “Phone” port on the rear panel) to which you connect a conventional (analogue) phone, either corded or wireless (DECT). You can set the registered SIP address of your VoIP contacts into the DialPlan of the Vigor2100V/VG series to make calling them quick and easy.
  • Page 27 Example 2: If Kelly gives you her SIP URL as sip:kelly@203.69.175.19 and PSTN number is 5972727 then you can enter the DialPlan as: Phone Number: Display Name: SIP URL: Loop through: Backup phone number: Example 3: If Kelly gives you her IP address 203.69.175.19 only, and it is not in your DialPlan, you still can press keypad on the phone to dial as #203*69*175*19# The detail explanation of the index window: Tick this to enable this entry.
  • Page 28: Sip Related Function Setup

    To manually dial the backup number via PSTN enter “#0” on your telephone handset, and then dial a PSTN phone number. If you are worried that the automatic loop through might over charge your PSTN phone number, we recommend you not to enter your PSTN phone number into the “Backup Phone Number”...
  • Page 29 The detail explanation of the SIP and Port settings window: The port number used to send/receive SIP message for building a SIP Port session. The default value is 5060 and this must match with the peer Registrar when making VoIP calls. Enter the domain name (or IP address) of your registered SIP Registrar Registrar server.
  • Page 30: Calling Scenario

    4.3 Calling Scenario 4.3.1 Peer-to-Peer Calling example Arnor and Paulin each have a Vigor2500V router, here are their settings in order to call each other. Arnor’s IP address: 214.61.172.53 Paulin’s IP address: 203.69.175.24 A. Arnor’s settings A-1. DialPlan index 1 Phone Number: 1234 (any number you like) Name: paulin...
  • Page 31: Calling Via Sip Server

    4.3.2 Calling via SIP Sever Below are the settings for John and David to call each other using their DrayTEL registered SIP accounts, as neither Vigor user have a fixed public IP address. John’s SIP url: john@draytel.org David’s SIP url: david@draytel.org A.
  • Page 32: Trouble Shooting

    Are the Network Connection Settings on Your PC OK? The following example is based on Windows XP case. Regarding to the examples of other OSs, please refer to the similar steps or find support notes in www.draytek.com. 1. Go to Control Panel and then double-click on Network Connections.
  • Page 33: Can You Ping The Router From Pc

    Step 3 Can You Ping the Router from PC? The default gateway IP address of the router is 192.168.1.1. Please check that if you can ping the router correctly. A. For Windows 1. Open the Command Prompt window (from start menu> Run ) 2.
  • Page 34: Are The Isp Settings Ok

    Step 4 Are the ISP Settings OK? 1. Go to the web configuration GUI and check your ISP settings. 2. Click Internet Access Setup items on the left frame of GUI. A. For PPPoE Users 1. Check that whether the Enable option is selected. 2.
  • Page 35: Back To Factory Default Setting

    C. For PPTP Users 1. Check that whether the Enable option is selected. 2. Check that whether PPTP Server, Username, Password is entered the correct value given by your ISP. 3. Check that whether LAN2/WAN IP Network Settings is set appropriately or not.
  • Page 36 After restore the factory default setting, please repeat Step 1 to Step 4 to reinstall the router. Configure the router according to your recorded settings. If the router does not work correctly, please contact your dealer for help. For any further questions, please send e-mail to support@draytek.com...

This manual is also suitable for:

Vigor 2200v

Table of Contents