Draytek VIGORFLY 200 User Manual page 32

Draytek network router user manual
Hide thumbs Also See for VIGORFLY 200:
Table of Contents

Advertisement

W
P
A
2
/
8
0
2
.
1
x
W
P
A
2
/
8
0
2
.
1
x
The WPA encrypts each frame transmitted from the radio using the key, which either PSK
(Pre-Shared Key) entered manually in this field below or automatically negotiated via 802.1x
authentication.
WPA Algorithms
Key Renewal Interval
PMK Cache Period
Pre-Authentication
IP Address
Port
Shared Secret
Select TKIP, AES or TKIP/AES as the algorithm for WPA.
WPA uses shared key for authentication to the network.
However, normal network operations use a different
encryption key that is randomly generated. This randomly
generated key that is periodically replaced. Enter the renewal
security time (seconds) in the column. Smaller interval leads
to greater security but lower performance. Default is 3600
seconds. Set 0 to disable re-key.
Set the expire time of WPA2 PMK (Pairwise master key)
cache. PMK Cache manages the list from the BSSIDs in the
associated SSID with which it has pre-authenticated.
Enables a station to authenticate to multiple APs for roaming
securer and faster. With the pre-authentication procedure
defined in IEEE 802.11i specification, the
pre-four-way-handshake can reduce handoff delay
perceivable by a mobile node. It makes roaming faster and
more secure. (Only valid in WPA2)
Enable - Enable IEEE 802.1X Pre-Authentication.
Disable - Disable IEEE 802.1X Pre-Authentication.
Enter the IP address of RADIUS server.
The UDP port number that the RADIUS server is using. The
default value is 1812, based on RFC 2138.
The RADIUS server and client share a secret that is used to
24
VigorFly 200 Series User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents