Table of Contents
Advertisement
If you want to use PIN code, you have to know the PIN code specified in wireless client. Then
provide the PIN code of the wireless client you wish to connect to the vigor router.
Enable WPS
WPS Current Status
WPS SSID
WPS Auth Mode
WPS Encryp Type
AP PIN
Configure via Push
Button
Check this box to enable WPS setting.
Display related system information for WPS. If the wireless
security (encryption) function of the router is properly
configured, you can see 'Configured' message here.
Display current selected SSID.
Display current authentication mode of the router. Only
WPA2/PSK and WPA/PSK support WPS.
Display encryption mode (None, WEP, TKIP, AES, etc.) of
the router.
The number displayed here is used for remote client
entering the registrar's PIN code in remote station to make
a network connection.
Click Start PBC to invoke Push-Button style WPS setup
procedure. The router will wait for WPS requests from
wireless clients about two minutes. The WPS LED on the
router will blink fast when WPS is in progress. It will return
106
VigorFly 200 Series User's Guide
Hide quick links:
Advertisement
Table of Contents
