Table of Contents
Advertisement
Session Timeout
Idle Timeout
M
i
x
e
d
M
i
x
e
d
The WPA encrypts each frame transmitted from the radio using the key, which either PSK
(Pre-Shared Key) entered manually in this field below or automatically negotiated via 802.1x
authentication.
WPA Algorithms
Key Renewal Interval
IP Address
Port
Shared Secret
VigorFly 200 Series User's Guide
(
W
P
A
+
W
P
A
2
)
/
8
0
2
(
W
P
A
+
W
P
A
2
)
/
8
0
2
authenticate the messages sent between them. Both sides
must be configured to use the same shared secret.
Set the maximum time of service provided before
re-authentication. Set to zero to perform another
authentication immediately after the first authentication has
successfully completed. (The unit is second.)
Set the maximum time that a wireless device may remain
idle. (The unit is second.)
.
1
x
.
1
x
Select TKIP, AES or TKIP/AES as the algorithm for WPA.
WPA uses shared key for authentication to the network.
However, normal network operations use a different
encryption key that is randomly generated. This randomly
generated key that is periodically replaced. Enter the renewal
security time (seconds) in the column. Smaller interval leads
to greater security but lower performance. Default is 3600
seconds. Set 0 to disable re-key.
Enter the IP address of RADIUS server.
The UDP port number that the RADIUS server is using. The
default value is 1812, based on RFC 2138.
The RADIUS server and client share a secret that is used to
authenticate the messages sent between them. Both sides
must be configured to use the same shared secret.
25
Hide quick links:
Advertisement
Table of Contents
