Table of Contents
Advertisement
802.1x WEP
Click the link of RADIUS Server to access into the following page for more settings.
IP Address
Port
Shared Secret
Session Timeout
Idle Timeout
Disable - Disable the WEP Encryption. Data sent to the AP
will not be encrypted.
Enable - Enable the WEP Encryption.
Enter the IP address of RADIUS server.
The UDP port number that the RADIUS server is using.
The default value is 1812, based on RFC 2138.
The RADIUS server and client share a secret that is used to
authenticate the messages sent between them. Both sides
must be configured to use the same shared secret.
Set the maximum time of service provided before
re-authentication. Set to zero to perform another
authentication immediately after the first authentication has
successfully completed. (The unit is second.)
Set the maximum time that a wireless device may remain
98
VigorFly 200 Series User's Guide
Hide quick links:
Advertisement
Table of Contents
