Table of Contents
Advertisement
If your ISP provides you the PPPoE connection, please select PPPoE for this router. The
following page will be shown:
User Name
Password
Confirmed Password
Redial Policy
MAC Address Clone
After finishing the settings here, please click Next.
Assign a specific valid user name provided by the ISP.
Assign a valid password provided by the ISP.
Type the password again for confirmation.
If you want to connect to Internet all the time, you can choose
Always On. Otherwise, choose Connect on Demand.
Always On – Choose it to enable router always keep
connection.
Connect On Demand - If the connection has been idled over
the value, the router will drop the connection.
Idle Time - Set the timeout for breaking down the Internet
after passing through the time without any action. The unit is
seconds. The range is XX ~ XX.
It is available when the box of Enabled is checked. Click
MAC Address Clone The router will detect the MAC address
automatically. And the result will be displayed in the field of
MAC Address.
Besides, if you want to change the MAC address for WAN
interface, simply click Enable and type the MAC address in
this field manually.
16
VigorFly 200 Series User's Guide
Hide quick links:
Advertisement
Table of Contents
