Opening The Glass Panels - Sirius Satellite Radio Valentina SLT958EM Manual

OPENING THE GLASS PANELS - SLT960 EM
Step 1a: Accessibilty to the filters is done by pulling
down on the glass panels. These are held on by
magnets.
Swing the glasss panels downwards on either side
to expose the grease filters. (Fig. 1)
OPENING THE LIGHT PANELS - SLT979EMEL
Step 1b: Accessibility to the filters is done by
pulling down on the glass panels. These are held on
by magnets. Swing the glass panels downwards on
either side to expose the grease filters. A chain is
fitted for safety purposes.
OPENING THE COVER PANELS - SLT958EM,
SLT958EMWH, SLT968EM, SLT968EM,
SLT972EMEL, SLT974EMEL
Step 1c: On the side where the speed control light
is visible, pull down in the centre of the panel.
The panel is held on by a strong magnet. Allow the
panel to swing open to expose the grease filters.
(Fig. 3) A chain is fitted for safety purposes.
Fig. 1
Step 1d: After swinging open the panel/panels on
any of the cassettes, disconnect the lighting by
depressing the tabs on the connection plug and
pulling the cable.
So that no damage is caused during the installation
process, remove the panels by unscrewing the
hinges on the underside of the cassette. This will
also lighten the cassette to make lifting it into place
and installation easier.
Unscrew hinges
Fig. 2
Panel drops down
Depress tabs
on side of plug
Example shown: SLT960
Fig. 3
9