Table of Contents
Advertisement
NOTE
Check PARTS LIST on page 28 for all included
parts prior to discarding packaging.
PRE-INSTALLATION CHECKS
Connect all of the electrical components to the unit and motor to make sure both the unit and the motor are
functioning properly.
(NOTE: The SEM8 / SEM81, SEM2 / SEM21, & SEM5 / SEM51 motor plug is fitted with a dummy plug
to protect the connection from dust. Ensure the red dummy plug is removed and replaced with the
two pin motor plug from the power transformer box. Failure to do so will result in only two speeds
operating).
Lighting connection
Remove all plugs and proceed with installation if both unit and motor are fully operational.
CAUTION
Installation must comply with the regulations in force regarding the ventilation of enclosed environments.
In particular, discharged air must not be conveyed into a duct used for fumes discharge or discharge from
appliances using gas or other combustible materials. Air cannot be ducted into roof space.
The use of discontinued ducts is not allowed without the approval of a qualified technician.
6
Advertisement
Table of Contents
