Table of Contents
Advertisement
3. Tap USE WPS MODE.
4. On your Router WI-FI press WPS button.
5. On your range hood:
• Switch off completely (light and motor)
• Hold
button for 3 sec for settings menu
01
(
LEDs will flash)
01
• Press
button to enable WPS pairing.
2
• Hold
button for 3 sec to save.
01
Note:
If buttons are not pressed within 10 secs the system
automatically exits from settings menu and all
unsaved operations will be discarded.
6. Press DONE on WPS description.
7. Use the QR code reader to connect the product
with the App, using the label on the brochure or using
the label located inside the product, found on the
motor when you remove the grease filters.
8. Press ACTIVATE DEVICE and you have a pop-up
message.
8. Tap the device icon. Enjoy your device.
19
Advertisement
Table of Contents
