Table of Contents
Advertisement
REMOTE CONTROL
Set-up:
6 channel control for rangehood remote.
•
When the rangehood is first turned on, hold the
lighting button for 5 seconds.
TECHNICAL DATA
•
Alkaline battery powered: 12 V mod. 23 A
•
Operating frequency: 433.92 Mhz
•
Combinations: 32.768
•
Max. consumption: 25 mA
•
Operating temperature: -20 ÷ + 55 °C
•
Dimensions: 120 x 45 x 15 mm.
OPERATING DESCRIPTION
The transmitter is equipped with 5 buttons for
rangehood management, as specified below:
: Light ON/OFF command.
: Motor ON (speed level 1) / OFF command.
: Reduce speed.
: Increase speed.
: 10-minute timer.
INITIAL OPERATING CONDITION
The manufacturer supplies the radio control unit
ready to be used with codes preset in the factory.
16
Dimmable lights function:
SLT972EMEL, SLT974EMEL, SLT979EMEL
models only
This function provides for lights dimmability, ranging
from 20% to 100%, by continuously pressing the
Light ON/OFF
on the remote control.
Functions are the following:
•
Light ON or OFF: shortly press the Light ON/OFF
button:
•
Change light brightness: When light is on,
continuously press the Light ON/OFF key
adjust the brightness. Stop pressing the button to
set the brightness level.
Colour temperature settings:
SLT972EMEL, SLT974EMEL, SLT979EMEL
models only
Make sure that the lights and the fan are off.
Holding down the TIMER key
at the previously set colour temperature.
Press and hold the Light ON/OFF key
the colour temperature.
As long as the key is kept pressed, the colour
temperature is changed from warm to cold. Release
the Light ON/OFF button
colour.
Exit the colour temperature selection function by
pressing the motor ON/OFF button
to
will turn on the light
to change
to select the desired
.
Advertisement
Table of Contents
