Table of Contents
Advertisement
Before proceeding with the installation of the ceiling cassette, please thoroughly inspect the entire unit
(including the motor) for any damages, including all of the electrical connections. If any damage is found,cease
installation and report it immediately to the retail partner that the cassette was purchased from.
•
Only use Sirius Ducting with a maximum length of 7 metres & minimum of 2 metres from the outlet collar
on the cassette to the motor location.
•
Limit the number of elbows in the ducting, since each 90 degree bend reduces the air capacity by 1 lineal
metre (e.g. if there are 2 x 90 degree bends, the maximum duct length should not exceed 5 metres.)
•
Avoid abrupt changes of direction where possible, bends of more than 90 degrees should be avoided at all
costs.
•
150mm ducting is applicable for SLT958EM, SLT972EMEL, SLT974EMEL models only.
•
200mm ducting is applicable for SLT979EMEL, SLT960EM, SLT968EM models only.
•
Please ensure the motor is accessible for servicing purposes. Additional charges are applied if
access is not deemed reasonable.
Reduction of the ducting diameter will void the manufacturer warranty as it will severely affect the performance
of the motor and may cause damage with prolonged usage.
Use ducting approved by standards enforced, see www.siriusbrand.com for details for approved ducting. The
manufacturer will not be deemed responsible for air capacity and noise problems caused by failure to comply
with the above and no warranty on the product will be provided.
The cassette requires one 10AMP GPO located inside the ceiling cavity
•
SLT960EM ONLY
Installation of the ceiling cassette can either be installed 50mm proud mounted or 260mm proud with the
additional purchase of the stainless steel proud mount kit (SPS-75005980960)
8
FAILURE TO INSTALL THE SCREWS OR FIXING DEVICE IN
ACCORDANCE WITH THESE INSTRUCTIONS MAY RESULT IN
ELECTRICAL HAZARDS OR ELECTROCUTION.
to power both the lighting and the motor.
WARNING
NOTE
WARNING
WARNING
DANGER
NOTE
Advertisement
Table of Contents
