Skoda OCTAVIA Workshop Manual page 145

OCTAVIA
Edition 06.05
S00.5103.68.20
Rear Wheel Suspension
- Build up pressure by pumping with the foot
pump.
- Check if all tools are correctly centered, if
necessary correct position.
- Then press in wheel hub by pumping with
the foot pump.
Further installation occurs in reverse order.
- Install ABS speed sensor ⇒ page 45-82.
- Install brake disc.
- Install brake carrier with brake calliper.
- Install drive shaft ⇒ page 42-72.
Tightening torques:
Screw for ABS speed sensor
Screw for brake disc
Brake carrier with brake calliper to
trailing arm
Tighten drive shaft to flange shaft M8
crosswise in 2 steps
(I and II)
Use new screws!
Wheel screw
Nut to wheel hub
Always use new nut!
Tightening torque ⇒ page 42-74
42
8 Nm
4 Nm
65 Nm
I - 10 Nm
II - 40 Nm
120 Nm
------------ 42-49 ------------