Jog Mode - Graco Reactor 3 E-20 Elite Operation

Jog Mode

Mode
Jog Jog Mode
Jog mode has two purposes:
• To speed fluid heating during circulation
• To ease system flushing and priming
Jog Level Level
Jog Jog Level
The jog level determines how quickly the system
will pass chemicals through the system. Jog
levels are between J1 and J20. Lower jog levels
will move fluid at lower speeds and pressures.
Higher jog levels move fluid at higher speeds
and pressures. Actual speed and pressure are
variable based on the chemicals used.
Jog the the System System
Jog Jog the System
NOTE: If pneumatic NOTE: NOTE: pneumatic pneumatic transfer transfer pumps transfer
manually turn on air to the pumps. See your
pump manual, Related Manuals, page 3
electric transfer transfer pumps pumps are in use, the pumps
If electric electric transfer pumps
automatically turn on when the motor is turned
on.
1. Tap the Pump Pump Mode Pump Mode button Mode
2. Select Jog Jog mode from the drop down menu. Jog
3. Tap
4. Tap to start the motor.
3A8500A
pumps pumps are in use,
.
to set the jog level.
5. Tap to stop the motor.
Jog the the Transfer Transfer Pumps Pumps Separately
Jog Jog the Transfer Pumps
Pneumatic Pneumatic Pneumatic Transfer Transfer Transfer Pumps: Pumps: Manually turn Pumps:
on/off air to the pumps one at a time. See your
pump manual, Related Manuals, page 3
Electric Electric Electric Transfer Transfer Pumps: Transfer Pumps: Pumps:
1. Ensure the motor power
2. Tap to turn on the A-side transfer
pump. Tap
level.
3. Tap to turn off the A-side transfer
pump.
4. Tap to turn on the B-side transfer
pump. Tap
level .
5. Tap to turn off the B-side transfer
pump.
Operation
Separately
Separately
.
is off.
to set the jog
to set the jog
31