Diagnostic Screen; Logs Screens - Graco Reactor 3 E-20 Elite Operation

Diagnostic

Diagnostic Screen

Diagnostic Screen Screen
Use the Diagnostic screen to view information
for all system components.
Icon Icon Icon Name Name Name
General
System Data
Heat Data
Pressure /
Flow Data
Override ISO
Lube Pump
Electric
Transfer
Pump Data
Engine Data

Logs Screens

Screens
Logs Logs Screens
Use the Logs screens to view information for
Reactor operation performance.
Errors
Errors Errors
The Errors screen shows the date, time, error
code, and description of all errors that have
occurred in the system during operation.
Icon Name Description
Icon Icon Name Name Description Description
Help Tap to display a QR
code with a link to
help.graco.com for error
help.graco.com help.graco.com
and troubleshooting
information.
3A8500A
Description Description Description
Tap to display general
system information related to
heat/pressure/flow.
Tap to display more detailed
information related to heat.
Tap to display more detailed
information related to pressure
/ flow.
Press to force the ISO lube
pump to run.
NOTE: Button is momentary NOTE: NOTE:
(must press and hold to run
pump).
Tap to display more detailed
information related to electric
transfer pumps.
NOTE: This page is only
NOTE: NOTE:
displayed if at least one
electric transfer pump is
installed on the system.
Tap to display more detailed
information related to engine.
NOTE: This page is only NOTE: NOTE:
displayed if an active
connection is present between
the MCM port 13 and an engine
with a J1939 communication
port.
Advance Display Module (ADM)
Events Events Events
The Events screen shows the date, time, event
code, and description of all events that have
occurred in the Reactor system during operation.
Usage Usage Usage
The Usage screen shows pump cycle counts
and material usage for each day of use of the
Reactor system.
USB Data Data Download Download
USB USB Data Download
1. Turn the main power switch (MP) OFF.
2. Open the electrical enclosure door.
3. Insert the USB drive to the port in the back
of the ADM.
NOTE: NOTE: NOTE: USB A type drives are supported.
NOTE: The ADM can read/write to FAT
NOTE: NOTE:
(File Allocation Table) formatted storage
devices. NTFS (New Technology File System)
formatted devices are not supported.
4. Close the electrical enclosure door.
5. Turn the main power switch (MP) ON. The
USB Download Download in in in Progress
USB USB Download
appear in the menu bar on the ADM screen.
6. Wait for the USB USB Download USB Download Complete Download
to appear in the menu bar.
7. Turn the main power switch (MP) OFF.
8. Open the electrical enclosure door.
9. Remove the USB drive.
10. Close the electrical enclosure door.
Progress icon
Progress will
Complete icon Complete
43