Mounting The Deflector - Stihl FS 85 Instruction Manual

English
For position of carrying ring see "Main Parts".
► Push the carrying ring (1) over the drive tube.
► Insert the M5 nut in the hex recess in the car‐
rying ring.
► Fit the M5x14 screw.
► Line up the carrying ring.
► Tighten down the screw firmly.
9

Mounting the Deflector

9.1 Mounting the Deflector
3
3
1 Deflector for mowing attachments
2 Deflector for mowing heads
Deflectors (1 and 2) are both mounted to the
gearbox in the same way.
► Place the deflector on the gearbox flange.
► Insert the screws (3) and tighten them down
firmly.
68
1
2
9.2 Fitting the Skirt and Blade
WARNING
Risk of injury from thrown objects and contact
with the cutting attachment. These parts must be
fitted to the deflector (1) when you use a mowing
head.
9.3 Fitting the Skirt
► Slide the lower guide slot of the skirt onto the
deflector – it must snap into position.
9.4 Removing the Skirt
2.
► Insert the stop pin into the hole in the skirt and
use it to push the skirt to the left.
► Pull the skirt off the deflector.
9.5 Mounting the Blade
► Slide the line limiting blade into the guide on
the skirt.
► Insert the screw and tighten it down firmly.
9 Mounting the Deflector
1.
0458-393-8721-C