Fueling; Fitting The Harness - Stihl FS 85 Instruction Manual

12 Fueling

WARNING
Pressure may have built up in the canister –
open it carefully.
► The fuel tank and the canister in which fuel
mixture is stored should be cleaned thoroughly
from time to time
Residual fuel and the liquid used for cleaning
must be disposed of in accordance with regula‐
tions and without harming the environment!
12 Fueling
12.1 Preparations
► Before fueling, clean the filler cap and the area
around it to ensure that no dirt falls into the
tank.
► Position the machine so that the tank cap
faces up.
12.2 Filling Up with Fuel
Take care not to spill fuel while fueling and do
not overfill the tank. STIHL recommends you use
the STIHL filler nozzle for fuel (special acces‐
sory).
► Open the tank cap.
► Fill up with fuel.
0458-393-8721-C
WARNING
After fueling, tighten down the filler cap as
securely as possible by hand.

13 Fitting the Harness

The type and style of the harness/shoulder strap
depend on the market.
The use of the shoulder strap is described in the
chapter on "Approved Combinations of Cutting
Attachment, Deflector, Handle and Harness".
13.1 Shoulder Strap
► Put on the shoulder strap (1).
► Adjust the length of the strap so that the cara‐
biner (2) is about a hand's width below your
right hip.
► Balance the machine – see "Balancing the
Machine".
English
1
2
73