Stihl FS 85 Instruction Manual page 64

English
8
► Place the secured assembly on the handle
support (8) with the wing screw at the side
nearest the engine.
► Push the wing screw into the handle support
as far as stop and then screw it down – but do
not finally tighten yet.
► Line up the handlebar at a right angle to the
drive tube – check distance A again.
► Tighten down the wing screw firmly.
64
5.3.3 Mounting the Control Handle
► Take out the screw (9) – the nut (10) remains
in the control handle (11).
► Push the control handle onto the handlebar (7)
until the holes (13) line up – the throttle trig‐
ger (12) must point towards the gearbox.
► Insert the screw (9) and tighten it down firmly.
5 Mounting the Bike Handle
0458-393-8721-C