Stihl FS 85 Instruction Manual page 65

5 Mounting the Bike Handle
5.3.4 Fitting the Throttle Cable
NOTICE
Do not kink the throttle cable or lay it in tight radii
– make sure the throttle trigger moves freely.
► Position the throttle cable retainer (15) and
throttle cable (14) against the drive tube.
► Close the throttle cable retainer (15). The
retainer (15) snaps into place.
5.3.5 Adjusting the Throttle Cable
► Check adjustment of throttle cable – see chap‐
ter on "Adjusting the Throttle Cable".
0458-393-8721-C
15 14
14
15
15
5.3.6 Swiveling the Handlebar
Transport position
► Loosen the wing screw (3) and unscrew it until
the handlebar (7) can be rotated.
► Rotate the handlebar 90° counterclockwise
and then swing the handles down.
► Tighten down the wing screw (3) firmly.
Working position
► Reverse the sequence described above to
swing the handles up and turn the handlebar
clockwise.
English
90°
3
7
65