Starting / Stopping The Engine - Stihl FS 85 Instruction Manual

English
Circular saw blades
► should "hover" about 20 cm (8 in) above the
ground.
When the correct floating position has been
reached:
► Tighten down the screw on the carrying ring
firmly.
15 Starting / Stopping the
Engine
15.1 Controls
15.1.1 Control handle on handlebar
STOP-
4 5
7
2
1 Throttle trigger lockout
2 Throttle trigger
3 Slide control
76
START
6
3
1

15 Starting / Stopping the Engine

15.1.2 Control handle on drive tube
2
1 Throttle trigger lockout
2 Throttle trigger
3 Slide control
15.1.3 Positions of slide control
4 STOP-0 – engine off – ignition is switched off
5 F – normal run position – the engine is running
or can start
6 START – ignition is switched on – the engine
can start
15.1.4 Symbol on slide control
7 h – stop symbol and arrow. To stop the
engine, push the slide control in the direction
of the arrow on the stop symbol (h) to
STOP-0.
15.2 Starting
► Press down the trigger lockout lever and
squeeze the throttle trigger
► and hold them in that position.
► Move the slide control to START and hold it
there.
► Now release the throttle trigger, slide control
and trigger lockout in that order. This is the
starting throttle position.
7
4
5
3
6
1
0458-393-8721-C