Maintenance And Repairs - Stihl FS 85 Instruction Manual

32 Maintenance and Repairs

31.2 Ignition System
Electronic magneto ignition
Spark plug (resistor type): Bosch WSR 6 F,
Electrode gap:
31.3 Fuel System
All position diaphragm carburetor with integral
fuel pump
Fuel tank capacity:
31.4 Weight
Dry, without cutting attachment and deflector
FS 85:
FS 85 R:
31.5 Overall length
without cutting attachment
31.6 Features
R Loop handle
31.7 Noise and Vibration Data
For further details on compliance with Vibration
Directive 2002/44/EC visit www.stihl.com/vib.
31.7.1 Cutting Attachment
Noise and vibration data measurements on FS
units include idling and rated maximum speed
with the same duration of exposure.
Sound pressure level L
with mowing head
FS 85 with bike handle:
FS 85 R:
with metal mowing attachment
FS 85 with bike handle:
FS 85 R with barrier bar:
Sound power level L
w
with mowing head
FS 85 with bike handle:
FS 85 R:
with metal mowing attachment
FS 85 with bike handle:
FS 85 R with barrier bar:
Vibration level a to ISO 22867
hv,eq
with mowing head
FS 85 with bike han‐
dle:
FS 85 R:
0458-393-8721-C
NGK BPMR 7 A
0.5 mm
440 cc (0.44l)
5.2 kg
4.9 kg
1760 mm
to ISO 22868
p
94 dB(A)
94 dB(A)
94 dB(A)
94 dB(A)
to ISO 22868
109 dB(A)
109 dB(A)
109 dB(A)
109 dB(A)
Handle, left Handle,
right
2
2.9 m/s 3.6 m/s
2
4.6 m/s 4.6 m/s
with metal mowing
attachment
FS 85 with bike han‐
dle:
FS 85 R:
31.7.2 Interchangeable Attachment
The noise and vibration data of the approved
attachments are listed in the instructions sup‐
plied with each attachment.
The K‑factor in accordance with Directive
2006/42/EC is 2.0 dB(A) for the sound pressure
level and sound power level; the K‑factor in
accordance with Directive 2006/42/EC is
2
2.0 m/s for the vibration level.
31.8 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorization and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation (EC) No. 1907/2006 see
www.stihl.com/reach
31.9 Exhaust Emissions
The CO value measured in the EU type appro‐
2
val procedure is specified at
www.stihl.com/co2
in the product-specific technical data.
The measured CO
representative engine in accordance with a
standardized test procedure under laboratory
conditions and does not represent either an
explicit or implied guarantee of the performance
of a specific engine.
The applicable exhaust emission requirements
are fulfilled by the intended usage and mainte‐
nance described in this User Manual. The oper‐
ating license shall be void if the engine is modi‐
fied in any way.
32 Maintenance and Repairs
Users of this machine may only carry out the
maintenance and service work described in this
user manual. All other repairs must be carried
out by a servicing dealer.
2
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
2
ized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training
Handle, left Handle,
right
2
2.1 m/s 3.3 m/s
2
4.4 m/s 5.6 m/s
value was determined on a
2
English
2
2
93