6.1 Overview
This chapter introduces the different operating modes available on your Multy M1. Or simply how the
Multy M1 is being used in the network.
6.2 Modes
This refers to the operating mode of the Multy M1, which can act in:
• Standard Mode: In standard mode Multy M1 has two IP addresses, a LAN IP address and a WAN IP
address. It also has more routing features. To see the standard mode features, go
123. In the example scenario below, Multy M1 connects the local network to the Internet through a
modem (M).
Figure 39 The Standard Mode Example
• Bridge Mode: In bridge mode, Multy M1 has one IP address and Multy M1 interfaces are bridged
together in the same network. To see the bridge mode features, go to
example scenario below, Multy M1 connects the local network to the Internet through a router (R).
Chapter 6 Multy M1 Modes
Multy M1 Modes
Multy WiFi System User's Guide
126
C
H A P T E R
Table 9 on page
6
toTable 8 on page
125. In the