Bridge Mode Navigation Panel - ZyXEL Communications WSR30 User Manual

5.3.2 Bridge Mode Navigation Panel

Figure 38 Navigation Panel (Bridge Mode)
The following table describes the submenus.
Table 9 Settings > System > Status (Bridge Mode)
LINK
Overview
Diagnose
Mesh
Settings
WiFi
LAN
System
Chapter 5 Multy M1 Web Configurator
TAB FUNCTION
Use this screen to:
• View read-only information about your Multy M1
• Configure WiFi settings
•
Advanced Use this screen to check the speed of the connection between your Multy M1
Speed Test and the broadband modem/router.
Speed Test Use this screen to view a summary of previously run speed tests.
History
My Mesh Use this screen to view Mesh network information.
Main WiFi Use this screen to enable the wireless LAN and configure wireless LAN and
wireless security settings.
WPS Use this screen to configure WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is enabled.
LAN IP Use this screen to configure the Multy M1's LAN IP address and subnet mask.
Use this screen to configure the Multy M1's DNS server.
Status Use this screen to view the basic information of the Multy M1
General Use this screen to change password or to set the timeout period of the
Setting management session.
Remote Use this screen to configure remote assistant.
Access
Maintenance Use this screen to upgrade firmware, restart the Multy M1 without turning the
power off or reset the Multy M1 to factory default settings.
Operating Use this screen to select whether your device acts as a router, or a bridge.
Mode
Logs Use this screen to view the list of activities recorded by your Multy M1.
Multy WiFi System User's Guide
125