Configure Guest Wifi Networks - ZyXEL Communications WSR30 User Manual

7.5 Configure Guest WiFi Networks

After the Multy M1 is set up, you can use separate WiFi networks for your clients. The WiFi settings will be
applied to all clients in the same network.
Note: This is not available if you are using bridge mode.
Click the Navigation Panel icon on the top-left corner (
1
open the Guest WiFi screen.
Select Enable Guest WiFi and enter the WiFi Name (SSID) and WiFi Password. Click Apply to save your
2
changes.
Chapter 7 Multy M1 Web Configurator Tutorials
Multy WiFi System User's Guide
138
), and click Settings > WiFi > Guest WiFi to