Check Your Multy-To-Multy Signal Strength - ZyXEL Communications WSR30 User Manual

Note: If your Multy Device is connected to a modem or router but is unable to access the
Internet during the installation process, you will see the following screen. Make sure your
smartphone is connected to your broadband router's WiFi network and then tap None
of These, Retry. If applicable, configure PPPoE or Static IP settings provided by your ISP.

3.4 Check Your Multy-to-Multy Signal Strength

You can always check the signal strength between your extender and primary Multy to see if they need
to be moved closer or farther apart.
Chapter 3 Zyxel Multy App Tutorials
Multy WiFi System User's Guide
44