Multy M1 Web Configurator; Overview; Accessing The Web Configurator - ZyXEL Communications WSR30 User Manual

Multy M1 Web Configurator

5.1 Overview

This chapter describes how to access the Multy M1 Web Configurator and provides an overview of its
screens.
The Web Configurator is an HTML-based management interface that allows easy system setup and
management via Internet browser. Use a browser that supports HTML5, such Mozilla Firefox, or Google
Chrome. The recommended screen resolution is 1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your device.
• JavaScript (enabled by default).
• Java permissions (enabled by default).

5.2 Accessing the Web Configurator

Make sure your Multy M1 hardware is properly connected (refer to the Quick Start Guide).
1
Launch your web browser.
2
If the Multy M1 is in Standard Mode (the default mode), enter "http://zyxelwifi.com or 192.168.212.1" in
3
the browser's address bar.
If the Multy M1 is in Bridge Mode, enter "http:// (DHCP-assigned IP)" in the browser's address bar.
On the displayed login screen, log in using your myZyxelCloud username and password or the local
4
password.
Note: If this is the first time you are accessing the web configurator or if the device has been
reset, you must complete the setup wizard, see
Note: For setting and changing the local password, see
Multy WiFi System User's Guide
120
C
H A P T E R
Chapter 4 on page 113.
Section 7.9 on page
5
147.