Chapter 7 Installing The M320 Router Without A Mechanical Lift; Lift; Removing M320 Components From The Chassis - Juniper M320 Hardware Manual

CHAPTER 7
Installing the M320 Router Without a
Mechanical Lift
Tools and Parts Required to Install the M320 Router Without a Mechanical Lift
Related
Documentation

Removing M320 Components from the Chassis

Copyright © 2010, Juniper Networks, Inc.
All manuals and user guides at all-guides.com
Tools and Parts Required to Install the M320 Router Without a Mechanical
Lift on page 71
Removing M320 Components from the Chassis on page 71
Installing the M320 Chassis in the Rack Manually on page 79
Reinstalling M320 Components in the Chassis on page 81
To install the router, you need the following tools and parts:
Phillips (+) screwdrivers, numbers 1 and 2
7/16-in. (11 mm) socket wrench for the DC power supply
3/8-in. nut driver for the cable management system
ESD grounding wrist strap
M320 Site Preparation Checklist Requirements on page 41
Removing M320 Components from the Chassis on page 71
Removing the M320 Power Supplies on page 72
Removing the M320 SIBs on page 73
Removing the M320 CBs on page 74
Removing the M320 Rear Fan Tray on page 74
Removing the M320 Cable Management System on page 76
Removing the M320 Front Fan Trays on page 76
Removing the M320 FPCs on page 77
71