Chapter 5 Installing The M320 Router Mounting Hardware; Verifying The M320 Rack-Mounting Hardware Received - Juniper M320 Hardware Manual

CHAPTER 5
Installing the M320 Router Mounting
Hardware

Verifying the M320 Rack-Mounting Hardware Received

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
All manuals and user guides at all-guides.com
Verifying the M320 Rack-Mounting Hardware Received on page 55
M320 Mounting Hole Locations for Four-Post Racks or Cabinets on page 56
Installing the M320 Mounting Hardware for a Four-Post Rack or Cabinet on page 56
M320 Mounting Hole Locations for Open-Frame Racks on page 59
Installing the M320 Mounting Hardware for Open-Frame Racks on page 60
The following mounting hardware is supplied with the router:
Large mounting shelf—Required for all mounting options.
Small mounting shelf—Required for a four-post rack or cabinet, or for center-mounting
in an open-frame rack.
Two front-mounting flanges attached to the front of the chassis—Required for a
four-post rack or cabinet, or for front-mounting in an open-frame rack.
Spacer bars attached to the rear of the front-mounting flanges—Required only for a
four-post rack or cabinet.
Two adjustable center-mounting brackets attached to the center of the chassis (in
the mounting holes closest to the rear of the chassis)—Required only for
center-mounting in an open-frame rack. You can move each mounting bracket to one
of 11 positions on the side of the chassis.
Cage nuts and screws are not provided.
M320 Chassis Description on page 6
Unpacking the M320 Router on page 50
Verifying the M320 Router Parts Received on page 51
55