7-13. Burner Ring
(1) Lift up the burner ring slightly and turn to left with
pliers.
CAUTION:
When reassembling:
(1) Ensure that three (3) burner side pins are
correctly engaged with the bottom of the
burner ring.
7-14. Burner Mat
(1) The burner mat is attached with heatproof
adhesive (BETAC, Part #20474926) on the burner
bottom. When replacing it, use with BETAC.
7-15. Burner Assembly
(1) Remove two (2) screws connecting the burner
and the heater base.
(2) Remove the burner assembly from the heater
base.
7-16. Burner Thermistor
(1) Disconnect the lead wire of the burner thermistor.
39