Heat Chamber And Flame Rod - Toyotomi NS-2800 Service Manual

7-12. Heat Chamber and Flame Rod

(1) Unfasten the lead wire from the flame rod.
(2) Remove two (2) screws fixing the top air duct to
the heat chamber and the burner, and remove
one (1) screw fixing the top air duct to the blower
motor case.
(3) Remove two (2) screws from the burner to
remove the flame rod.
CAUTION:
When reassembling:
(1) Position the heat chamber first and then position
the top air duct.
(2) Securely insert the rubber air hose to the joint
pipe of the blower motor case.
(3) The connection for the flame rod maybe loose.
Be sure it is securely fastened to the burner
assembly.
38