7-6.
Fuel Pump
(1) Remove the cabinet B. Remove the nut of the fuel
pipe.
(2) Remove one (1) screw fixing the fuel pump to the
base.
(3) Lift and remove the fuel pump.
CAUTION: Be careful to prevent dust from being
sucked into the pump.
7-7.
Fuse
(1) Remove the rear panel and the cabinet B.
(2) Pull out the fuse from fuse holder.
7-8.
Transistor
(1) Remove the rear panel and the cabinet B.
(2) Disconnect the lead wire from the circuit board.
(3) Remove one (1) screw to remove the transistor.
7-9.
High Limit Switch
(1) Remove two (2) screws from retainer.
36