2-8.
Fuel Tank Installation
Fuel tank installation is illustrated below. Since fuel tank installation techniques vary from
place to place, use the following check list as a guide to the fuel storage facilities.
1. The fuel supply tube must be shorter than 1.5 m (5 ft.).
2. Piping should include no inverse U-type bends (to avoid air locks, which could
block the fuel supply).
3. A fuel strainer must be used to avoid fuel pump failure.
Fuel pipe (Part #17185654)
21
Insert cap nut (Part #17185330)
22
Sleeve (Part #17185335)
23
Strainer (Part #17185336)
24
13