Garmin FishFinder 340C Owner's Manual page 48

U F 340C > M
SING THE ISHFINDER
To start or stop Pointer mode on a Sonar Page:
1. From a Sonar Page, hold PAUSE for two seconds. The
Fishfinder is now in Pointer mode.
2. Use the Rocker to move the cursor around on the screen.
Information about the Pointer location appears on the
screen.
3. Press QUIT to resume normal scrolling.
42
W
ARKING A AYPOINT
To mark an underwater waypoint:
1. Make sure that your Garmin GPS or compatible NMEA
navigation device is properly attached and the
NMEA Input/Output is On (see page 41).
2. From a Sonar Page, press and hold PAUSE to enter Pointer
mode and pause the screen movement.
3. Use the Rocker to move the cursor onto the target (for
example, an underwater drop off or stump) that you want to
mark. Data appears with the GPS coordinates, depth, and
surface temperature for that location.
4. Press ENTER. The New Waypoint Window appears with
a default four-digit name and the pointer's coordinates
automatically filled in.
Fishfinder 340C Owner's Manual