Alarms Tab - Garmin FishFinder 340C Owner's Manual

U F 340C > U
SING THE ISHFINDER

Alarms Tab

The Alarms tab contains settings for the Fishfinder's alarms. (For
a list of alarms and unit messages, see page 45.) The Alarm tab is
divided into two sub tabs: Sonar alarms and System alarms.
To set an alarm:
1. Use the Rocker to highlight a sub tab of the Alarms tab.
2. Highlight the field below the alarm name that you want to
set, and press ENTER.
3. Highlight a new setting, and press ENTER.
4. Highlight the next field to the right (if applicable), and press
ENTER. Then enter a setting, and press ENTER to finish.
32
M M
SING THE AIN ENU
Sonar Sub Tab
• Fish—sets an alarm to sound (and an icon to appear) when
the Fishfinder detects a fish of the specified size.
• Shallow Water and Deep Water—set alarms to sound when
you enter an area of specified depth that is too shallow or
too deep. The settings are Off (default) and a user-defined
number.
• Drift—sets an alarm to sound when you exceed a specified
drift depth range. For example, if the value is set to 5 feet
and the current depth is 20 feet when the alarm is enabled,
the alarm sounds if the Fishfinder detects a depth greater
than 25 feet or shallower than 15 feet.
• Water Temp—sets an alarm to sound when the transducer
reports a temperature either above, below, inside, or outside
the specified values.
Fishfinder 340C Owner's Manual