Garmin FishFinder 340C Owner's Manual page 13

4. Place the swivel mount bracket over the swivel base and
secure it with the short knob.
Installing the Unit on the Mounting Bracket
To install the Fishfinder on the mounting bracket:
1. Align the slot on the back of the Fishfinder with the long
mounting knob, and slide the Fishfinder into place. If
necessary, adjust the long knob to spread the bracket arms
apart. (Turn counter-clockwise to widen the bracket arms
and clockwise to tighten.)
2. Adjust the Fishfinder angle, and tighten the long mounting
knob until snug.
3. Rotate the swivel mount bracket by twisting it left or right.
The bracket clicks as you turn it. Select a good viewing
angle, and then tighten all knobs.
Fishfinder 340C Owner's Manual
I F
NSTALLING THE ISHFINDER
4. Connect the power/data and transducer cables to the back
of the Fishfinder, making sure the locking rings are fully
tightened on both connectors.
Flush Mounting the Fishfinder
You can flush mount the Fishfinder 340C into a flat panel.
• Select an appropriately sized location for the unit.
• Use the Flush Mount Template provided in the box to
determine a location.
• Check that all cables reach the unit mounting location.
• Always wear safety goggles and a dust mask when drilling,
cutting, or sanding.
340C > M F
OUNTING THE ISHFINDER
7