Using The Adjustment Menu - Garmin FishFinder 340C Owner's Manual

U F 340C > U
SING THE ISHFINDER

Using the Adjustment Menu

The Adjustment Menu gives you direct access to the most
commonly used settings and features. The Adjustment Menu also
provides a quick review of how the sonar is configured. This menu
varies, depending on your transducer type, your current page, and
your current settings. You can make all adjustments by using the
Rocker and the ENTER key.
36
A M
SING THE DJUSTMENT ENU
To change an Adjustment Menu setting:
1. Press ADJ/MENU. A list of all options and their current
settings appears. The Adjustment Menu automatically
disappears when idle for 20 seconds, or you can press
ADJ/MENU to exit.
2. Press the Rocker to select the option that you want to
change, and then press ENTER to show the settings. The
current setting is highlighted in yellow.
3. Press the Rocker to select a new setting.
4. Press ENTER to accept the new setting and return to the
Sonar Page.
The current adjustment option appears in the upper-left corner of
the screen. For fast adjustment from a Sonar Page, press left or
right on the Rocker to scroll through the options. Press up or down
on the Rocker to change the current setting, or press ENTER to
review the setting before you make changes.
These available adjustments are:
• Range—sets the screen depth range used for viewing. Auto
(recommended) automatically tracks the bottom, or you can
set a specific depth range (making sure the range includes the
bottom of the water).
Fishfinder 340C Owner's Manual