Genie DPL Super Series Operator's Manual page 14

Operator's Manual
MAINTENANCE
Check the Hydraulic Oil Level -
AC and DC Models
Maintaining the hydraulic oil at the proper level is
essential to machine operation. Improper hydraulic
oil levels can damage hydraulic components. Daily
checks allow the inspector to identify changes in oil
level that might indicate the presence of hydraulic
system problems.
1 Be sure the platform is fully lowered.
2 Check the sight gauge on the side of the
hydraulic reservoir.
Result: The hydraulic oil level should be visible
in the middle of the sight gauge. Do not overfill.
Hydraulic oil specifications
Hydraulic oil type
12
Check the Air Line Lubricator
Oil Level - Air Models
Maintaining the proper oil level in the lubricator
canister is essential to safe operation and good
machine performance. Failure to keep the lubricator
canister at the proper oil level could result in unsafe
operating conditions and possible component
damage.
1 Be sure the platform is fully lowered.
2 Inspect the lubricator canister for the proper oil
3 To add oil, remove the oil lubricator canister
Dexron equivalent
Oil Specifications
Oil Type
Genie DPL Super Series
First Edition • Fifth Printing
level.
Result: The oil level must be within
12.7 mm from the top of the lubricator canister.
from the lubricator base and fill with oil. Install
the canister back onto the lubricator base.
1
/ inch /
2
10W automotive engine oil
Part No. 38132