Genie DPL Super Series Operator's Manual page 21

First Edition • Fifth Printing
Emergency Stop
1 Push in the red Emergency Stop button at the
platform controls or at the ground controls to
stop the up function.
Platform Raise and Lower
1 Twist to release the red Emergency Stop button.
2 Push in the control activate button and rotate
the up/down switch in the desired direction of
travel.
Manual Lowering
1 Activate the manual lowering lever.
Auxiliary Platform Lowering
- AC & DC Models
1 Turn the key switch to the on position OR turn to
ground control. Pull out the red Emergency Stop
button to the on position.
2 Activate the auxiliary platform lowering button at
the ground controls.
After Each Use
1 Select a safe storage location—firm, level
surface, weather protected, clear of obstruction
and traffic.
2 Remove the key to secure from unauthorized
use.
3 DC models: Recharge the battery.
Part No. 38132 Genie DPL Super Series
Operator's Manual
OPERATING INSTRUCTIONS
19